Industry News
  • Correct Heat Treatment is Conductive to Long Service Life of Mould
    Posted: 09/27/2016 10:55:41  Hits: 45
    1. How to conduct heat treatment of H13 die steel can make its hardness reach 58 degrees?  If the heat quenching or oil quenching temperature is 1050 ~ 1100℃, its hardness can meet the requirement. However, common hot work dies do not require such a high hardness, because high hardness w...
  • Stainless Steel Grades Table
    Posted: 09/13/2016 01:30:25  Hits: 20
    China GB1220   Japan JIS America AISI ASTM England BS9706 S1449 Germany DIN17440 DIN17224 France NF A 35-572 NF A 35-576-582 NF A35-584 1Cr17Ni7 SUS301 301,S30100 301S21   Z12CN17.7 0Cr18Ni9 SUS304 30...
  • Features of Surface Treatment on Zinc Alloy
    Posted: 08/09/2016 02:38:40  Hits: 29
    Zinc alloy is an alloy that uses zinc as base and adds other elements. Commonly added alloy elements include aluminum, copper, magnesium, lead and titanium. Zinc alloy has low melting point, good mobility, convenience for fusion welding, brazing and plastic processing. Zinc alloy has strong corrosio...
  • Fuel Consumption Standard Increasing Aluminum Castings
    Posted: 07/08/2016 05:29:41  Hits: 10
    On January 1 this year, the forth automobile fuel consumption limit standard began to be carried out. The standard regulates that by 2020, average oil consumption of all of automobiles must be reduced from 6.9L/100km on the third stage to 5.0L/100km on the forth stage. MIIT (Ministry of Industry and...
  • Magnesium Alloy Contributes to Economic Growth
    Posted: 06/16/2016 03:40:29  Hits: 13
    Magnesium alloy is the metal material having the lightest weight, which is used to make aircraft, spacecraft, rocket and missile. Magnesium alloy is widely used for mobile phone, shell of laptop, ornaments and other die casting products. The metal is also generally used in auto and household applian...
  • UAV: New Field for Mold Enterprises Updating
    Posted: 04/25/2016 05:32:54  Hits: 74
    In rent years, Chinese mold industry has high growth rate. Making level of mold is improved. Among that, there is no lack of enterprises having excellent performances on large, precise, complicated and long service mold. However, Chinese mold industry has still not entered into a flourishing period ...
  • Over Capacity of Die Casting Die Steel Should be Faced
    Posted: 04/23/2016 06:23:28  Hits: 67
    Facing with over capacity of die casting die steel, international community should eliminate abnormal trade barrier, making efforts to build up a fair, just and predictable international market environment and opening world economy.  Since the middle of April, India launched anti-dumping and a...
  • The Future Development Trend of Die Casting on Auto
    Posted: 03/14/2016 05:36:04  Hits: 143
    In the development history of auto industry, the adoption of die casting parts was paid attention during the design and application of every component. Especially for complicated, large and important components were classified as significant research subject. That meant that die casting industry had...
  • Chinese Mold Manufacturers Should Enhance Cooperation
    Posted: 03/09/2016 04:55:37  Hits: 108
    Chinese Mold Manufacturers should transfer single and vicious competition into win-win cooperation, breaking the narrow thought that colleagues are enemies. Fair and innocuous competition is maintained on mold market through self-discipline in industry.  Structural adjustment of mold industry ...
Contact & Follow
#3, Changfu Road, Ludong, Humen, Dongguan, Guangdong, 523935, P. R. China.
+86769-89874809/+8618926517996

Link To Us|Privacy Policy|Sitemap|Top